Totally 15 days:
1: Organize all the related documents,papers and patents. (2 days)
2: Go through/draw flowchart of FT (3 days)
3: Track FT variables that related to extra gain (5 days)
4. Find at least 10 in field cases FT configuration, try different input signal, track extra gain introduced by FT. (5 days)
Monday, July 29, 2013
Monday, July 18, 2011
Plan for July 18. 2011 to July 22, 2011
1. Go through the architecture of Mersenne code.
a. BootLoader Project
b. Bootup Init
c. Memory Change Init
d. ISR
e. EEPROM Image
2. Go through MECO code
3. Go through Self Check Code
a. BootLoader Project
b. Bootup Init
c. Memory Change Init
d. ISR
e. EEPROM Image
2. Go through MECO code
3. Go through Self Check Code
Tuesday, January 11, 2011
DTMF Transfer Plan
1. Get familiar with what DTMF does
2. end fitting session (programming session)
3. request Self Check
4. discard changes ( original data should be recoved from eeprom)
5. memeory change
6. band gains 1~4 increase
7. band gains 1~4 decrease
8. band gains 5~16 increase
9. band gains 5~16 decrease
10. band gains 1~2 increase
11. band gains 1~2 decrese
12. band gains 1~16 increase
13. band gains 1~16 decrease
14. Output threshold all band decrease
15. Ouptu threshold all band increase
T2 user manual (T2 remote)
1. Hold the phone approximately 3 inches from the ear
2. Press *, * to wake up T2
3. Press telephone key to increase gain, decrease gain, memory change, mute/unmute hearing aid
4. T2 will sleep automatically after 20 seconds
Remote Fitting user manual (T2 on demand)
- T2: User can use DTMF telephone to adjust gain, change memory, mute/unmute the hearing aid
- Remote fitting: Audiologist can use DTMF phone to do hearing aid fitting
2. end fitting session (programming session)
3. request Self Check
4. discard changes ( original data should be recoved from eeprom)
5. memeory change
6. band gains 1~4 increase
7. band gains 1~4 decrease
8. band gains 5~16 increase
9. band gains 5~16 decrease
10. band gains 1~2 increase
11. band gains 1~2 decrese
12. band gains 1~16 increase
13. band gains 1~16 decrease
14. Output threshold all band decrease
15. Ouptu threshold all band increase
T2 user manual (T2 remote)
1. Hold the phone approximately 3 inches from the ear
2. Press *, * to wake up T2
3. Press telephone key to increase gain, decrease gain, memory change, mute/unmute hearing aid
4. T2 will sleep automatically after 20 seconds
Remote Fitting user manual (T2 on demand)
Sunday, January 2, 2011
1983~1988 Starkey Ad on Hearing Instrument
- To Dispensor
Commnets: In-the-Cannal HA
- To Dispensor
- To Dispensor
- To Dispensor
- To dispensor
CE-6 sets new standards of techonological Excellence with the most innovative new features available in a ustom ITE today....FRC Feedback Cancellation Circuit..IFC intermodulation Filter Circuit...Custom Power Amp...shell with new coarctation process....
comments: simple digital algorithm in ASIC
- To all
- To dispensor
IFC noise reduction
FRC rrduce feedback
IROS vent
Coarctatation permits fitting on the smallest ears
- To clinical
Monday, December 27, 2010
1981~82 Starkey Ad on Hearing Instrument
- To Hearing Impaired and dispensor
- To dispensor
- To all
New Logo, From Starkey U.S. Starkey Canada, Starkey U.K. Starkey France, Starkey Germany(Willco)
Comment:
New logo is applied, the international branches of Starkey is built up now...
- To all
Should heairng be your concern you may wish to consider Starkey "CE" for these reasons...
Accountalbility...Experience...Education...Research...Philosophy..
- To all
CE Series Custom In the Ear Aids...Standard Instruments...Batteries...All-Make Reapir...Special equipment...custom Earmolds...Care Patient Education
We realize...A good fitting requires more than just a good hearing aid
Starky U.S....Starkey Canada...Starkey U.K...Starkey France...Starkey Germany(Willco)
1979~80 Starkey Ad on Hearing Instrument
- To All
Comment: So smart to choose the date..
- To All
Comments: It seems all the hearing aid industry were discussing about Tinnitus.
- To Dispensors and Designer
Sereis RE Real Ear Probe Microphone System
Model ST1 Stethoscope Power PAK
Comments: It seems the Battery Simultor and Real Ear Probe Microphone System has faded out from market. Only the Stethoscope still there.
1978 Starkey Advertisement on Hearing Instrument
- To ???
Designed to meet the needs of educators, researchers, and students...
A Self-contained electronic system with accompanying text of fully detailed demonstrations and experiments for the hearing speech, and psychological Sceiences...
Comments: Starkey started to develop the market of equipment.
- To ???
Generate it, filter it, phase-shift it, limit it, attenuate it, mix it, amplify it, control it, monitor it..
The Hearing Science Laboratory...
Sunday, December 26, 2010
1976~77 Starkey Advertisement on Hearing Instrument
- To Hearing Impaired and Dispensor
The consumer acceptance of the custom in-the-ear concept
Our position of leadership in custom in-the-ear fittings
The acoutic efficiency of the system
- To All
- NuEAR
Custom Input Compression
Write for details on dynamic range fitting and phonemic compression.
Comment: When Starkey was trying to sell "CE" ITE hearing aid, NuEar had released its first CIC hearing aid. I think this is the reason Starkey has to purchase NuEear in 1989.
- To ENT, Dispensor and Audiologist
C.A.R.E: Continuing Aural Rehabilitation and Education
Starkey has developed C.A.R.E. programs to help you provide your own personal kind of care ot those individuals you are serving professionally.
For:
Patient Education
Public Lectures
Interdisciplinary Education
1975 Starkey Lab Advertisement on
- To Hearing Impaired
Repair Division: Repair and Recondition Any Hearing Aid, 1 Year Guarantee, 50% Discount
- To all
Starkey has something for every hearing aid specialist!
Starkey CE in-the-ear hearing aid - satisfaction guranteed 100%
The lastest estimates indicate that Starkey produces more custom-made in-the-ear hearing aids than the entire ouput of all types of in-the-ear aids made by all other U.S. manufacturers combined.
Complete Earmold Division - current monthly sales up over 250% over 1974!
Nation's largest "all make" Hearing aid repair service!
- To all
Audiometer Repairs and Calibration
1974 Starkey Advertisement on Hearing Instrument
- To Hearing Impaired
Repair Division: Repair and Recondition any Hearing Aid $6.90
- To Hearing Impaired
Send your ear impression for free custom replica!
- To Hearing Aid Dispensor
- To Hearing Impaired
60 Day Trial Period...Patient Must Be Satisfied...If not, Return to Us for Full 100% Credit!
- To Hearing Impaired
Earmold Division: Quality one-day service, Postage paid labels, compare our prices!
Learn Starkey History From Advertisement
Bill Austin: Founder of Starkey Labs
1967 William Austin starts Professional Hearing Aid Service, an all-make hearing instrument repair service in St. Louis Park, Minnesota. The company offers fixed repair charges—an industry first. Comment: It's very important to choose location to start your business!
1971 Austin purchases Starkey Laboratories, a small earmold company, from Harold Starkey. Austin merges Professional and Starkey, retaining the Starkey name.
Comment: Starkey extends its business to earmold!
1973 Starkey releases the CE-1, a custom in-the-ear hearing aid with an industry first 90-day trial period and 1-year "Worry Free" warranty. Starkey releases variations of the first CE in the following years. Soon after, Starkey becomes the world's leading manufacturer of custom hearing instruments.
1975 With custom hearing aid production growing so dramatically, Starkey outgrows its original facility and purchases a new building in nearby Eden Prairie, Minnesota.
1976 Starkey opens its first subsidiary in Manchester, England. Over the next five years, Starkey opens facilities in Toronto, Canada; Glencoe, Minnesota; Hamburg, Germany and Paris, France.
1977 Austin feels that the hearing aid industry could benefit from an image-enhancing, professional auditory educational package for consumers. In response, he creates the CARE program, a comprehensive series of booklets and videos that promotes the benefits of improved hearing.
1978 The Starkey Fund is developed as a battery recycling program. Dispensers would send used batteries to Starkey for credit donated for helping needy people receive hearing assistance. The program evolves into the Starkey Hearing Foundation, a tax-exempt charitable organization.
1979 Austin decides outstanding patient service necessitates state-of-the-art diagnostic equipment. This philosophy leads to the development of the CHAT hearing aid tester, the Tinnitus Research Audiometer and the Digital Drain Meter.
Comment: Starkey extends its business again to test equipment!
1982 Starkey releases the CE-5 series, the industry's first canal hearing aids.
1983 President Ronald Reagan gets fitted with Starkey INTRA hearing aids. The President's fitting encourages a wider acceptance of hearing aids among the general public, resulting in increased sales throughout the industry.
Comment: Intersting!
1986 Starkey releases the CE-7 series and the Earborne Headset, the world's first custom headset. Earborne incorporates a custom molded earpiece and a lightweight microphone.
Comment: Starkey Lab extends its business to headset!
1989 Starkey purchases Omni Hearing Systems and Nu-Ear Electronics
Comment: Starkey lab purchase again!
1993 The Tympanette is introduced, as Starkey designs a new instrument to fit entirely in the ear canal, providing enhanced cosmetic and acoustic benefits. Today, the Tympanette is the industry's smallest and most popular completely-in-the-canal instrument.
1995 Starkey headquarters receives ISO 9001 certification, meeting the most comprehensive quality standards for manufacturing, operations and documentation. To ensure compliance, the British Standards Institute annually audits Starkey's quality system. Starkey Germany, Canada, UK, France and Italy have also received ISO certification.
1996 Starkey releases Sequel Custom Programmable instruments. Building upon the success of the Sequel Series, Sequel Programmables greatly reduce distortion and offer advanced compression technology. The new Professional Fitting System is also released to allow for quick, accurate and easy instrument programming.
Comment: Now Programmable heairng aid era!
1999 Starkey enters the digital age with the release of the Cetera and Aries digital hearing systems. Both instruments take a research-based approach to amplification.
Comment: Now Digital Hearing Aid Era!
2001 Starkey introduces the Genesis digital product family. Genesis quickly becomes the industry's most comprehensive product line with Axent hearing instruments becoming the benchmark for advanced digital technology.
2002 The Starkey Hearing Alliance network is established. Industry leading hearing professionals team with Starkey to offer a unique blend of technology and patient care. Each affiliated practice shares a commitment to providing the most appropriate hearing solutions while providing "Better Hearing with a Human Touch."
2004 Elton John's appearance and support of the 2004 "So The World May Hear" Awards Gala helps the Starkey Hearing Foundation raise a record $2.7 million during the event. Construction begins on the new William F. Austin Center. On December 13, 2004, the Starkey Hearing Research Center opens.
2006 Starkey redefines the hearing solutions industry by introducing nFusion Technology with the release of its Destiny series hearing aids coupled with Inspire OS fitting software. Destiny is the first hearing aid to utilize both nano and digital technology.
Comment: nFusion technology = destiny series Hearing aid + Inspire OS fitting Software
2007 Starkey launches the Destiny 1600 model including a full line of open fit solutions enabling you to experience the most natural sound quality the industry has to offer.
Comment: first time open fit is introduced in Starkey!
2008 Starkey launches BluWave™ Signal Processing (SP), which is similar to the operating system on a computer. In addition, Starkey launches the industry's most award-winning hearing aid — Zōn — powered by BluWave SP and encompassing the most advanced features available.
Comment: Starkey starts to develop own dsp processor for its digital hearing aids!
2009 Starkey launches S Series™ with Drive Architecture™, the revolutionary new line of hearing aids using multi-core, open architecture technology. S Series builds on already best-in-class features with a new feedback eliminator, noise system and telephone solution in addition to the T², which lets patients use their touch-tone phone as a remote control.
Comment: Ezairo5900 and more and more new features!
2010 Starkey launches a number of exciting new products and programs: S Series™ iQ, featuring Voice iQ, a new noise management and speech preservation system designed to be so fast and smart it may reduce noise between the syllables of words; OtoLens™, the world’s first invisible-in-the-canal hearing aid; and Starkey Pediatrics, a new program designed specifically for kids using Starkey’s evidence-based design approach and the line authorized to offer Nickelodeon™ characters on earmolds and materials that come with hearing aids.
Comment: Compared to S Series IQ, OtlLens, and Pediatrics program, the most important event of starkey in 2010 is, James Yang, starts to work here!
Tuesday, December 21, 2010
Starkey Firmware Group Competency Model
Current Level:
Engineer II
Quality
* Good understanding of the Hearing Aid System
* Monitors and checks work to meet quality standards
* Demonstartes a high level of care and thoroughness (Completeness and Accuracy)
Teamwork
* Participates as an active and contributing member of a team to achieve team goals
* Works copperativley with other team members
Building Trust
* Interacts with others in a way that gives them confidence
* Is seen as direct and truthful
* Keeps confidences, promises, and commitments.
Work Ethics
* Sets high standards and well-defined, realistic goals
* Works with minimal supervision
* Fully motivated to achieve goals
Collabortion
* Builds constructive working relationships with memgbers of other groups to meet mutal goals and objectives.
Adaptability
* Adapts well to changes in assignments and priorities
Problem Solving and Analysis
* Tackles and resolves some of the most challenging technical problems
Organization Skill
Demonstrate organizational skills through effective time managment and focusing on priorities
Target Level (In first year)
Senior Engineer I
* Work independently but have the maturity to involve others when needed or seek help from others
* They are very reliable in taking owner-ship of their work and present high-quality work while meeting the deadlines
* They find ways to do things that take the whole picture into acount and look along multiple dimensions of a problem.
* They are capable to professionally interact with other teams
* They not only apply engineering processes such as creating design and implementation documents, creating unit test, peer reviews, coding conventions, etc to their daily work, but also actively contribute to and improve these processes.
Technical Knowledge
Widely recognized as the go-to person in several key technical areas. Technical experise is demonstarted through problem solving, applying professionaly judgement, and competent performance.
Breadth of Knowledge
Possess a wide breadth of knowledge encompassing technial areas realted to the Firmware, Software, Hardware, Audiology etc. This is demonstared through active participating cross functional meeintgs and proving solutions to problems extending multiple dsciplines.
Engineer II
Quality
* Good understanding of the Hearing Aid System
* Monitors and checks work to meet quality standards
* Demonstartes a high level of care and thoroughness (Completeness and Accuracy)
Teamwork
* Participates as an active and contributing member of a team to achieve team goals
* Works copperativley with other team members
Building Trust
* Interacts with others in a way that gives them confidence
* Is seen as direct and truthful
* Keeps confidences, promises, and commitments.
Work Ethics
* Sets high standards and well-defined, realistic goals
* Works with minimal supervision
* Fully motivated to achieve goals
Collabortion
* Builds constructive working relationships with memgbers of other groups to meet mutal goals and objectives.
Adaptability
* Adapts well to changes in assignments and priorities
Problem Solving and Analysis
* Tackles and resolves some of the most challenging technical problems
Organization Skill
Demonstrate organizational skills through effective time managment and focusing on priorities
Target Level (In first year)
Senior Engineer I
* Work independently but have the maturity to involve others when needed or seek help from others
* They are very reliable in taking owner-ship of their work and present high-quality work while meeting the deadlines
* They find ways to do things that take the whole picture into acount and look along multiple dimensions of a problem.
* They are capable to professionally interact with other teams
* They not only apply engineering processes such as creating design and implementation documents, creating unit test, peer reviews, coding conventions, etc to their daily work, but also actively contribute to and improve these processes.
Technical Knowledge
Widely recognized as the go-to person in several key technical areas. Technical experise is demonstarted through problem solving, applying professionaly judgement, and competent performance.
Breadth of Knowledge
Possess a wide breadth of knowledge encompassing technial areas realted to the Firmware, Software, Hardware, Audiology etc. This is demonstared through active participating cross functional meeintgs and proving solutions to problems extending multiple dsciplines.
Tuesday, October 12, 2010
Register Information
Matlab Account:
Yang Jingbo mailto:james.yangjb@gmail.com %2019xxxx
iExpense YxxxJ paxxxxxd
Ultipro yxxxj YxxgJ1xxxx8
VPN:
Username: YxxxJ
Password: jy5x7st
Connect to: 167.100.118.50
Amazon:
james.yangjb@gmail.com
1xxx88
Yang Jingbo mailto:james.yangjb@gmail.com %2019xxxx
iExpense YxxxJ paxxxxxd
Ultipro yxxxj YxxgJ1xxxx8
VPN:
Username: YxxxJ
Password: jy5x7st
Connect to: 167.100.118.50
Amazon:
james.yangjb@gmail.com
1xxx88
Sunday, October 10, 2010
Starkey Lab Project (Continued with Oct. 7, 2010)
CFX core
According to 1. encoding format 2. Unit dedicated to, CFX instructions are categorized into several types.
All 32 bit instrucitons. No two-word instructions.
1. Long Instructions: only single instruction in the 32-bit instruction word.
a. control flow b. memory load or store with full-sized address/offset
c. load and store indirect to P memory
d. load full-sized immediate
e. pointer arithmetic with full-sized immeidate
f. system control
2. Arithmetic-Move Instructions: Arithmetic part (DCU) + Move part (DMU or AGUs)
3. Move-Move Instructions: Move part (DMU or AGUs) + Move part (DMU or AGUs)
According to 1. encoding format 2. Unit dedicated to, CFX instructions are categorized into several types.
All 32 bit instrucitons. No two-word instructions.
1. Long Instructions: only single instruction in the 32-bit instruction word.
a. control flow b. memory load or store with full-sized address/offset
c. load and store indirect to P memory
d. load full-sized immediate
e. pointer arithmetic with full-sized immeidate
f. system control
2. Arithmetic-Move Instructions: Arithmetic part (DCU) + Move part (DMU or AGUs)
3. Move-Move Instructions: Move part (DMU or AGUs) + Move part (DMU or AGUs)
Thursday, October 7, 2010
Starkey Lab Project (continued with Oct. 6, 10)
Doc 2, Chapter 4 Hear Core
Microcode Module --> linked up --> Function Chains
System_control_register (D_System_Ctrl): Hear_pause bit, Hear_resume bit, Hear_running bit, Hear_Rest bit
Function_chain_control_reg (D_Hear_FC_Enable)
D_Hear_CMD_0_7 & D_Hear_CMD_8_15
D_Hear_FC_Priority: Normal & High High Priority Funciton chains are handled first
if the same priority level, CFX command first, then FIFO A interrupt, then FIFO B interrupt
24 funcitons trigger accepted: 16 from CFX commands, 8 from FIFO A&B interrupt
D_Hear_FC_Status: pending or not
Blcok_Floating_Point_reg (D_HEAR_BFP):
Chapter 5 Memory (16 pages)
all memories are signle port.
program memory & data memory
memory attached to CFX & memory attached to Hear core
all memory attached to Hear core can be accessed by CFX by P bus or X bus
Write-back-buffers: allow the sytem to read back the value written to the memory address in the previous cycle without stalling the instruction pipeline.
Interrupt Vector:
system-rest, watchdog, timer1, timer2, spi, iic, shared iis and pcm, gpio, hear event 0~7, Fifo A0~3, B0~3,
UART Receive, UART Transmit
Chapter 6 FIFO Controller ( 10 Pages)
FIFO A 0 , 1, 2, 3
FIFO B 0, 1, 2, 3
Each FIFO -- seperate control registers --> map to X memory space --> 24bit
START
END
SIZE
Enable: note: enalbe register is P memory space
FIFO buffers for: block input, block output, application
FIFO_PTR and FIFO_Count
IOBLOCK_PTR and BASE_PTR and BLOCK_SIZE and BLOCK_CNT
FIFO access priority is fixed
Chapter 7 IOC ( 14 pages)
Introduction IOC input IOC output IOC data transfer timing IOC data synchronize
tasks:
1. control data input from input stage or PCM interface
2. control data output from output stage or PCM interface
3. control FIFOs via FIFO controller
ADC0, ADC1, ADC2, ADC3 (18bit only, need to extend to 24bit)
PCM0, PCM1 (normally 24 bit)
D_IOC_FIFO_CFG_reg --> D_IOC_FIFO_CFG_ADCx_SHIFT bit
select FIFO connected to input channel:
D_IOC_INPUT_CFG reg --> IOC_INPUT_CFG_xxx_STORE bit
Dynamic range extension: IDRX0 (ADC0&ADC1) IDRX1(ADC2&IDC3)
More than one input source can be saved into the same FIFO:
in time sequence: ADC0, ADC2, ADC1, and ADC3
or: PCM0, PCM1
one 18bit DAC output channel
two pcm: pcm0 & pcm1
when to get data in, when to send data out, synchronize pcm and adc&dac
General Purpose Timers: two
Chapter 8 Input Stage (22 pages)
Chapter 9 Output Stage (8 pages)
Microcode Module --> linked up --> Function Chains
System_control_register (D_System_Ctrl): Hear_pause bit, Hear_resume bit, Hear_running bit, Hear_Rest bit
Function_chain_control_reg (D_Hear_FC_Enable)
D_Hear_CMD_0_7 & D_Hear_CMD_8_15
D_Hear_FC_Priority: Normal & High High Priority Funciton chains are handled first
if the same priority level, CFX command first, then FIFO A interrupt, then FIFO B interrupt
24 funcitons trigger accepted: 16 from CFX commands, 8 from FIFO A&B interrupt
D_Hear_FC_Status: pending or not
Blcok_Floating_Point_reg (D_HEAR_BFP):
Chapter 5 Memory (16 pages)
all memories are signle port.
program memory & data memory
memory attached to CFX & memory attached to Hear core
all memory attached to Hear core can be accessed by CFX by P bus or X bus
Write-back-buffers: allow the sytem to read back the value written to the memory address in the previous cycle without stalling the instruction pipeline.
Interrupt Vector:
system-rest, watchdog, timer1, timer2, spi, iic, shared iis and pcm, gpio, hear event 0~7, Fifo A0~3, B0~3,
UART Receive, UART Transmit
Chapter 6 FIFO Controller ( 10 Pages)
FIFO A 0 , 1, 2, 3
FIFO B 0, 1, 2, 3
Each FIFO -- seperate control registers --> map to X memory space --> 24bit
START
END
SIZE
Enable: note: enalbe register is P memory space
FIFO buffers for: block input, block output, application
FIFO_PTR and FIFO_Count
IOBLOCK_PTR and BASE_PTR and BLOCK_SIZE and BLOCK_CNT
FIFO access priority is fixed
Chapter 7 IOC ( 14 pages)
Introduction IOC input IOC output IOC data transfer timing IOC data synchronize
tasks:
1. control data input from input stage or PCM interface
2. control data output from output stage or PCM interface
3. control FIFOs via FIFO controller
ADC0, ADC1, ADC2, ADC3 (18bit only, need to extend to 24bit)
PCM0, PCM1 (normally 24 bit)
D_IOC_FIFO_CFG_reg --> D_IOC_FIFO_CFG_ADCx_SHIFT bit
select FIFO connected to input channel:
D_IOC_INPUT_CFG reg --> IOC_INPUT_CFG_xxx_STORE bit
Dynamic range extension: IDRX0 (ADC0&ADC1) IDRX1(ADC2&IDC3)
More than one input source can be saved into the same FIFO:
in time sequence: ADC0, ADC2, ADC1, and ADC3
or: PCM0, PCM1
one 18bit DAC output channel
two pcm: pcm0 & pcm1
when to get data in, when to send data out, synchronize pcm and adc&dac
General Purpose Timers: two
Chapter 8 Input Stage (22 pages)
Chapter 9 Output Stage (8 pages)
Wednesday, October 6, 2010
My post box
Yang Jingbo
Post Box: 44444
Eden Prairie, MN 55344
Where is the post box?
US Post Service: 8725 Columbine Rd, Eden Prairie, MN, 55344
Contact: (952)-944-7186
Note: two keys for the post box, only applied 6 months
Post Box: 44444
Eden Prairie, MN 55344
Where is the post box?
US Post Service: 8725 Columbine Rd, Eden Prairie, MN, 55344
Contact: (952)-944-7186
Note: two keys for the post box, only applied 6 months
Starkey Lab Project ( continued from Oct 3, 10)
Current Project: Denver ( two series: Opal RIC 312 with RF & Power 13 BTE)
New Project: Evanston (two series: Ezairo Only wireless & Ezaino +E2M2)
E2M2 with a V8 uP which is majorly deal with wireless communication with wireless Receiver/Transfer chip.
Doc 2: Hardware Reference (210 pages)
Chapter 1: Introduction (3 pages)
pre-requirement: assembly level programming + dsp application + audio systems + dsp tools.
Chapter 2: System Overview (6 pages)
CFX core: data flow control + dsp applications
Hear core: help CFX to do dsp applications, such as WOLA, FFT etc.
IOC: together with FIFO, provide data input and output to and from CFX core and Hear core.
CPX local memory: Program Memory + X data memory + Y data memory
Hear local memory: Microcode memory
Shared memory: can be accessed by Hear core and CFX core.
Hear core:
Microcode modules --> function chains --> triggered by CFX commands or events from FIFO
Floating point block: for large dynamic range data such as subband
Hear core shared memory: for tempory data, algorithm coefficients, signal data.
FIFO:
1. for circular buffer
2. access conflict from the two cores
3. track data input and output, trigger function chains. etc.
Peripherial:
1. an interrupt controller
2. two general purpose timers
3. a watch-dog timer
4. crc
5. security block
Interfaces:
1. IIC debug interface
2. IIC general purpose interface
3. SPI interface
4. UART interface
5. 5 LSAD inputs
6. 5 GPIO pads
IOC:
1. 4 input channels multiplexed from 5 analog input
2. 1 output channel to drive receiver
IIS and PCM interface:
1. communicate with iis device
2. communicate with pcm device
3. communicate with NOAHlink device
Clock:
1. one on-chip oscillator: 5.12M
2. one standby oscillator
3. allow for selection other clock source
4. series of clock divider
Chapter 3: CFX core (4 pages)
1. Processor Overview
CFX core: dual Harvard, duaol MAC architecture, 24bit
BootROM on it to initialize applications
Debug controller, memory mapped registers
2. Application Overview
Tasks run on CFX core:
Configure IOC and input stage/IIS or PCM to get input
Configure IOC and output stage/IIS or PCM to distribute output signal
Configure FIFO to handle input, output and immediate data
Configure the HEAR core
Execute DSP algorithms
Support Debug
Chapter 4: Hear core (10 pages)
1. Overview
not programmable, no direct debug access,
2. Function Chain Controller
3. Block Floating-Point
New Project: Evanston (two series: Ezairo Only wireless & Ezaino +E2M2)
E2M2 with a V8 uP which is majorly deal with wireless communication with wireless Receiver/Transfer chip.
Doc 2: Hardware Reference (210 pages)
Chapter 1: Introduction (3 pages)
pre-requirement: assembly level programming + dsp application + audio systems + dsp tools.
Chapter 2: System Overview (6 pages)
CFX core: data flow control + dsp applications
Hear core: help CFX to do dsp applications, such as WOLA, FFT etc.
IOC: together with FIFO, provide data input and output to and from CFX core and Hear core.
CPX local memory: Program Memory + X data memory + Y data memory
Hear local memory: Microcode memory
Shared memory: can be accessed by Hear core and CFX core.
Hear core:
Microcode modules --> function chains --> triggered by CFX commands or events from FIFO
Floating point block: for large dynamic range data such as subband
Hear core shared memory: for tempory data, algorithm coefficients, signal data.
FIFO:
1. for circular buffer
2. access conflict from the two cores
3. track data input and output, trigger function chains. etc.
Peripherial:
1. an interrupt controller
2. two general purpose timers
3. a watch-dog timer
4. crc
5. security block
Interfaces:
1. IIC debug interface
2. IIC general purpose interface
3. SPI interface
4. UART interface
5. 5 LSAD inputs
6. 5 GPIO pads
IOC:
1. 4 input channels multiplexed from 5 analog input
2. 1 output channel to drive receiver
IIS and PCM interface:
1. communicate with iis device
2. communicate with pcm device
3. communicate with NOAHlink device
Clock:
1. one on-chip oscillator: 5.12M
2. one standby oscillator
3. allow for selection other clock source
4. series of clock divider
Chapter 3: CFX core (4 pages)
1. Processor Overview
CFX core: dual Harvard, duaol MAC architecture, 24bit
BootROM on it to initialize applications
Debug controller, memory mapped registers
2. Application Overview
Tasks run on CFX core:
Configure IOC and input stage/IIS or PCM to get input
Configure IOC and output stage/IIS or PCM to distribute output signal
Configure FIFO to handle input, output and immediate data
Configure the HEAR core
Execute DSP algorithms
Support Debug
Chapter 4: Hear core (10 pages)
1. Overview
not programmable, no direct debug access,
2. Function Chain Controller
3. Block Floating-Point
Monday, October 4, 2010
Subscribe to:
Posts (Atom)











